home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
fax_sstv
/
gshpc12
/
news12.doc
< prev
next >
Wrap
Text File
|
1995-12-03
|
6KB
|
142 lines
Geza. Szabados-Hann DL4SAW
Am Zündhütle 7a
76228 Karlsruhe
======================================================================
Lieber OM !
Hiermit erhelaten Sie die "SHW-1.2" Version vom GSHPC.
Ich hoffe, daß ich einige Fehler von SHW 1.01 korrigieren konnte.
Das Programm sollte jetz mit dem ET-4000 auch ohne UNIVESA läufen.
Ich hoffe, daß die Probleme mit den 32-Bit PCI-Bus VGA-Karten auch
beseitig werden konnte. Noch nicht berücksichtigt werden konnten
die VGA-Karten, die die Farben Rot und Blau vertauschen.
Neue Funktionen gegenüber SHW-1.01:
-----------------------------------
Shift-F6 Kopiere RX->TX mit Verkleinerung und Positionierung.
Shift-F7 Kopiere TX->RX mit Verkleinerung und Positionierung.
Alt-F6 Kopiere das sichtbare Schirm in das TX-Fenster.
Alt-F7 Kopiere das sichtbare Schirm in das RX-Fenster.
Alt-F1 Speichere das sichtbare Schirm in das File SREEN.BMP.
640x480 Pixel 24-Bit BMP-Format (ca 900K).
F10 Help-System, anstelle von Exit. Zeigt abhängig vom
Menü-Kontext die zur Verfügung sehenden Kommandos.
Wird z.B F10 beim offenen Word-Fenster gedrückt,
werden die Kommandos für die Texteingabe eingeblendet.
Achtung ! Exit to DOS mit Alt-X !
=================================
Löschen von Bilddateien in Load-Menü (Ctrl-D).
Probleme mit Laufwerk A: und B: sind beseitigt, im Fehlerfall
(z.B. Laufwerk nicht geschlossen) kann zwischen "Abort" und
"Retry" gewählt werden.
Wenn Speicher oberhalb der 1MB-Grenze (mindestens 1MB) gefunden
wird, und der XMS Treiber installiert ist, werden auch größere
abgedeckten Flächen gespeichert und wiederhergestellt (z.B. Tx-
Fenster wird nach Ausschalten der Oszilloskopfunktion und nach
ZOOM widerhergestellt). Der freie XMS-Speicher wird im Konfi-
gurationsmenü angezeigt. XMS erkennt, im Gegensatz von EMM386,
alle im oberen Bereich installierten Treiber (z.B. Smartdrive).
Konfigurationsmenü (F2) liefert zusätzliche Informationen:
-----------------------------------------------------
* Aktueller VESA-Modus
* Freier konventioneller Speicher (unterhalb von 1Mb)
* Freier XMS Speicher
* CPU/VGA Speed-Faktoren in Prozent zu einem 486-DX 50MHz PC,
mit VESA-Local-Bus(50MHz) SVGA (Genoa, Cirrus Chipsatz).
Die automatische Einstellung von VESA-Modus kann unterdrückt
werden. Folgende Modi können gewählt werden: #272, #273 oder #274.
GSHPC "CALLSIGN" #272 <ret>
Modus 272 (32.000 Farben) wird eingestellt, auch dann, wenn Modus
274 (16 Mio. Farben) vorhanden ist. Es ist eine Option, wenn kein
VESA-Modus angegeben wird, sucht das Programm den Modus mit der
besten Farbauflösung.
Mit freundlichen Grüßen 73'dx Geza DL4SAW
====================================================================
Dear OM !
Here you have got the "SHW-1.2" version of the GSHPC SSTV-program.
I hope, I could correct some troubles of the version SHW 1.01.
It should work with ET-4000 VGA-boards without UNIVESA driver.
Also the problems with new 32-bit PCI-bus boards have been solved.
VGA-adapters exchanging red and blue could not be considered.
New functions:
-------------
Shift-F6 Move RX->TX with 1:2 size compression.
Shift-F7 Move TX->RX with 1:2 size compression.
Both functions provides the possibity to shift the
small image within the destination area.
Alt-F6 Copy the visible screen into the TX-window.
Alt-F7 Copy the visible screen into the RX-window.
Alt-F1 Store the visible Schirm into the file SREEN.BMP,
640x480 pixel 24-Bit BMP-format (ca 900K).
F10 Context oriented Help-System instead of Exit.
Depending on which window is opened, different
help-text will be displayed.
Note ! Press ALT-X to exit the program to DOS.
====== (Also Ctrl-C and than pressing any key)
It is possible to delete image files when in the "Load-
Window" (Ctrl-D).
Problems when using disk "A" or "B" are solved. If the program
is "hanging" because of disk error (e.g. drive is opened), it
can be selected between "Abort" and "Retry".
If extended memory is available (at least 1MB), and the XMS
driver have been installed, also large overlayed areas can
be restored. It is the case when you start receiving with the
scope function switched on. After leaving the RX-mode the
TX-widow will be restored. XMS-recognises automatically all
drivers (e.g. Smartdrive) using the upper memory.
Configuration-Window (F2) delivers some more informations:
----------------------------------------------------------
* Current VESA-Modus
* Free DOS memory (below 1Mb)
* Free XMS memory
* CPU/VGA speed-factor in percent, comparing to a 486-DX 50MHz PC,
with VESA-Local-Bus(50MHz) SVGA (Genoa, Cirrus Chipset).
The user is allowed to select a VESA-Modus, he want use.
Valid modes are: #272, #273, #274.
GSHPC "CALLSIGN" #272 <ret>
Mode 272 (32.000 colors) will be selected, even mode 274 (16 Mio.
colors) is supported. It is not necessary to preselect the video
mode. If no selection is used, the program selects the mode with
the higher color resolultion supprted by the VGA-adapter.
Vy 73'dx Geza DL4SAW